...
Further Competition On-Catalogue has a value limit that you cannot exceed and cannot be used to procure Catalogue Solution (including Additional Services) that encompass one or more Foundation Capabilities. You must terminate (and have re-procured replacement services if necessary) before you hit the limit of £250,000 (excl VAT).
You must also be able to evaluate the Catalogue Solutions based on the information that was made available from the Buying Catalogue. If you don’t have enough information to evaluate, or you can’t tell how much of any Associated Services you need to buy and the level of uncertainty will impact your selected Catalogue Solution, you must use the Further Competition Off Catalogue procedure.
Prepare your requirements
- Identify all the Service Recipients that will be receiving services under the competition.
- List the Capabilities that represent your needs. It will also help to review the Epics and identify which are the most important to you.
- Identify any services you might need: training, implementation, etc.
- Be sure to consider your local environment and any special requirements, for example, local integrations.
Identify the volumes you need to buy and other costs that will impact total cost of ownership
Most Catalogue Solutions have a per patient price that will be based on the number of patients registered with the Service Recipient. But some Solutions and Additional Services are based on users or other units or might be based on transactions. You need to use the same volumes (e.g. users or patients) for each Catalogue Solution when calculating the cost of each Catalogue Solution, but the volumes may differ where different Additional Services and Associated Services will make up your order. Be sure that you are treating all the Catalogue Solutions equally when you choose which services and how much of each service to include in your estimate and later evaluation.
You may also wish to consider your own costs that might vary depending on the Supplier: implementation, transition if applicable, training, etc. You need to identify these costs before you begin the procurement so that they are applied fairly and appropriately to all Catalogue Solutions you are evaluating.The procurement preparation activity required for this procedure is the same as for the Direct Award procedure.
Confirm the evaluation criteria
...
The option of price only and price and quality has been provided in the framework to give you flexibility. It is important that you follow your organisation’s Standing Financial Instructions (SFIs), particularly the choice and application of the two options.
Price only (with no non-price Elements). Where you believe you can evaluate based on price only, with no quality constraints you might choose this option. If you are evaluating multiple Solutions, you
...
will need to calculate the total contract
...
as described
...
later, and award to the Supplier of the Solution with the lowest total cost.
Price and quality. Where you wish and can differentiate the Catalogue Solutions that meet its requirements based on quality and price, the criteria below can be used within the ranges indicated:
...
All the Solutions listed on the Buying Catalogue are your longlist.
Create a shortlist
Review all the Catalogue Solutions on the Buying Catalogue and create a shortlist of Catalogue Solutions that can meet your requirements by using the Capabilities and other information on the Catalogue Solution Listing.
Determine your volumes
The method of determining your volumes is the same as for the Direct Award procedure.
Step 3: Evaluate
Evaluate your list of Catalogue Solutions. If there is only one Catalogue Solution on your shortlist that meets your requirement, you can appoint the Supplier of that Catalogue Solution. As part of your audit trail, you should record a justification that describes how that Catalogue Solution is the only one on the Buying Catalogue that meets your requirement, based on the information about that Catalogue Solution, and any Catalogue Solutions disregarded, as listed on the Buying Catalogue.
Calculate costs
You must calculate the total Price for each Solution on your shortlist, considering any Additional Services and Associated Services you require, applying the volumes you defined and any other costs you identified during step 1 prepare. An explanation and examples for calculating contract cost can be found 5.2.4 above.
If you find there isn’t enough information in the Catalogue Solution Listing to identify how much of any service to buy, you will need to use the Further Competition Off Catalogue procedure so that a Supplier can respond to your requirements.
The method of determining your total costs is the same as for the Direct Award procedure.
Apply the criteria and score each Catalogue Solution
...
Notify your preferred Supplier
Get in touch with the preferred Supplier as soon as possible. You will need to ask the Supplier for the following information so that you can complete the Call Off Order Form:
- For Section A
- Supplier details such as address, contract representative and a Supplier reference number
- For section C.2 if implementation is required
- The milestone dates for implementation
- An overview implementation plan if you want one
- The implementation plans
- For section D.1
- Whether the Supplier has Commercially Sensitive Information
- Whether the Supplier has any Exclusive Assets
- Section D5.1
- The Suppliers Data Protection Officer
- Section D5.2
- Any variation to default Personal Data Processing information if you wish to allow them to make amends
This activity is the same as for the Direct Award procedure.
Complete Call Off Order Form
You will need to set an initial term for the Call Off Agreement, we recommend that you set a Call Off Initial Period (see 4.1.6 above) of 12 months (or slightly longer if there is an implementation that is staged). If you don’t give notice to terminate before the end of the initial term, the contract will continue to roll monthly until you give 30 days’ notice
Signature
Once the Call Off Order Form has been completed, send it to the Supplier so that they can review and sign it. If the Supplier agrees it is correct, they should sign it and send it back to you.
You will also need to set an initial term for each Service Instance, we recommend that you set a Service Instance Initial Period (see 4.1.6 above) of no more than 12 months. If you don’t give notice to terminate before the end of the initial term, the contract will continue to roll monthly until you give 30 days’ notice
If the Supplier thinks anything is incorrect, they will discuss this with you and you can decide whether to a) correct the Call Off Order Form and send it back to the for signature or b) withdraw the order if you disagreeThis activity is the same as for the Direct Award procedure.
Signature
This activity is the same as for the Direct Award procedure.
Award
Once you have both signed the Call Off Order Form, you have awarded the contract to the winning supplier.
Send a copy of your Call Off Order Form to NHS Digital at [xxxx]. For organisations in receipt of GMS funding, NHS Digital will arrange payment to the Supplier. For all organisations, this lets NHS Digital know who has a Call Off Agreement, which enables them to notify you of any issues with your Supplier.
You should also provide feedback to the unsuccessful Suppliers; templates are available in Appendix 1: Sample feedback letter.
Where the Catalogue Solution is to be paid for using your GMS funding allocation NHS Digital will arrange payment to the Supplier.